A row of steel trunnion nuts for Tr 48×8 trapezoidal screws – made to order
Production

Trapezoidal screws and nuts

We make trapezoidal lead screws by thread whirling in lengths up to 3 metres – right- or left-hand, with the ends machined to your drawing. If a rolled screw will do, we can supply that too. The matching nuts are made of CuSn12 bronze as standard and of steel on request – including safety nuts that keep an eye on thread wear.

3 mscrew length
Tr 18 – Tr 80standard threads
CuSn12bronze nuts, steel on request

What we make

Single pieces or series – to drawing, to a sample or to the worn screw that needs replacing.

  • whirled trapezoidal lead screws up to 3 m long
  • rolled trapezoidal screws
  • C15 and C45 steel, other materials and lengths on request
  • right- and left-hand threads
  • screw ends machined to drawing
  • CuSn12 bronze nuts, steel or other materials on request
  • safety (wear-indicator) nuts
  • other diameters and pitches on request
Trapezoidal screws with bronze nuts

Standard threads

ThreadNominal diameterPitch
Tr 18×418 mm4 mm
Tr 20×420 mm4 mm
Tr 30×630 mm6 mm
Tr 40×740 mm7 mm
Tr 48×848 mm8 mm
Tr 55×955 mm9 mm
Tr 60×960 mm9 mm
Tr 80×1080 mm10 mm

All sizes are available right- or left-hand; other diameters and pitches on request. Most of them also serve as lead screws in our own TMP screw jacks.

CuSn12 bronze nuts

In a trapezoidal drive it is the nut that should wear, not the screw – and CuSn12 bronze takes that job seriously. It slides on the steel screw and spares it.

We make a nut for every thread size, including flanges and holes to your drawing. On request also of steel or other materials – such as the steel trunnion nuts from the Tr 48×8 order in the photo at the top.

Flanged bronze trapezoidal nuts
The nut that keeps watch

Safety (wear-indicator) nuts

A safety nut runs along the screw with the load nut but carries nothing itself – it keeps watch. Between the two nuts there is a gap S. As the load nut's thread wears, the gap gets smaller. Measure it now and then with a feeler gauge and you know how much life the nut has left – once wear reaches a quarter of the screw pitch, replace the nuts.

Should the load-bearing thread ever fail, the safety nut takes over the load and stops it from dropping. That makes it worthwhile wherever a screw holds a load overhead – lifting platforms, tables or stage machinery. It protects in one load direction, so please tell us in your enquiry whether the screw pulls or pushes the load.

We can also set up a pair of nuts to eliminate backlash – the second nut is adjusted against the load nut so that no axial play remains in the thread. Useful wherever precise positioning matters. Safety nuts for TMP screw jacks are in our catalogue; for your own screws we make them to drawing.

Diagram: load nut (1), safety nut (2) and the gap S, which shrinks as the thread wears
1 – load nut · 2 – safety nut · S – gap · F – load

From our workshop

Custom order Tr 48×8 – screws and trunnion nuts before assembly
Custom order Tr 48×8 – screws and trunnion nuts before assembly
The same screws and nuts, assembled
The same screws and nuts, assembled
Bronze nuts and trapezoidal screws
Bronze nuts and trapezoidal screws
Square bronze trunnion nut
Square bronze trunnion nut
The same trunnion nut from another angle
The same trunnion nut from another angle
Bronze worm wheels for TMP screw jacks on trapezoidal screws
Bronze worm wheels for TMP screw jacks on trapezoidal screws

FAQ on trapezoidal screws

How long can your trapezoidal screws be?

Up to 3 m by thread whirling. Other lengths on request.

What are the screws and nuts made of?

Screws are made of C15 or C45 steel as standard, nuts of CuSn12 bronze. Steel nuts or other materials on request.

Can you make a left-hand thread or a non-standard pitch?

Yes. Standard sizes are available right- or left-hand, other diameters and pitches on request.

How do I know the nut is worn?

Most easily with a safety nut – the gap between it and the load nut shrinks as the thread wears. Once wear reaches a quarter of the screw pitch, replace the nuts. Without a safety nut you have to measure the axial play in the thread.

What do you need for a quotation?

The thread (for example Tr 40×7), length, hand, material, quantity and a drawing of the ends. No drawing? The old screw or a photo with dimensions will do.

Need a trapezoidal screw made to measure?

Send us the thread, length and a drawing of the ends – we will reply with price and delivery date.