ZAP 50 worm gearbox, type E, with IEC motor flange and output shaft – 3D model
Worm gearboxes

ZAP

ZAP worm gearboxes are compact single-stage gearboxes in six sizes – from ZAP 32 to ZAP 100. The worm is hollow, so the IEC motor shaft slides straight into it – the drive is shorter and no coupling is needed. We supply them with or without a motor, with a solid or a hollow output shaft.

32 – 100 mmcentre distance a, 6 sizes
10 – 100gear ratio
up to 492 Nmoutput torque

A short drive that adapts to your machine

On type E the motor shaft slides straight into the hollow worm – there is no coupling between motor and gearbox. Type S has a free input shaft for a belt, a coupling or your own motor.

Sizes 32 to 80 have their covers recessed in the housing, so the gearbox can be mounted on three flat faces without any extras. Where needed, we add feet, a large flange or IEC B5 and B14 flanges – the gearbox adapts to the machine, not the machine to the gearbox.

  • ratios 10 to 100 in a single stage
  • output with a single, double or hollow shaft
  • 11 mounting options and 6 mounting positions
  • sizes 32 to 80 with lifetime grease filling, in any position
  • hardened, tempered and nitrided worm, wheel rim of CuSn12 bronze
Inside the ZAP 50 worm gearbox, type E – hollow worm, worm wheel with bronze rim, bearings and output shaft, 3D model
ZAP 50, type E, from the 3D model – the motor slides into the hollow worm on the right.
Sizes

Choose the size by torque

Size = centre distance between worm and wheel in millimetres. The deciding factor is the output torque – from 20.5 Nm for ZAP 32 to 492 Nm for ZAP 100 (SF = 1).

Outlines are to the same scale, viewed from the output shaft, without motor. Each size has its own catalogue page with ratings and torques for all ratios and matching IEC motors.

Technical data

ParameterZAP 32ZAP 40ZAP 50ZAP 63ZAP 80ZAP 100
Centre distance a [mm]3240506380100
Gear ratios u10 – 5010 – 6310 – 8010 – 10010 – 10010 – 100
Max. output torque M2 at n1 = 1,400 / 700 rpm [Nm]20.5 / 1836.5 / 38.549 / 5897 / 115179 / 233361 / 492
Max. input power P1 at n1 = 1,400 rpm [kW]0.250.460.691.232.174
Input shaft d1 – type S [mm]11 j614 j618 j620 j628 j628 j6
Output shaft d2 – versions J, X [mm]14 j619 j622 j628 j635 k642 k6
Hollow shaft d3 – version D [mm]14 H719 H722 H728 H735 H742 H7
IEC motor – type E, B14 or B5 flange56 · 6363 · 7163 · 71 · 8071 · 80 · 9080 · 90 · 10080 · 90 · 100 · 112
Max. Fr / Fa on the output at n2 < 10 rpm [N]650 / 1301,400 / 2802,100 / 4203,500 / 7005,200 / 1,0406,200 / 1,200
Weight ZAP.SJ1 [kg]1.734.836.7211.7117.8930.84
Lubricant filling [kg]grease 0.11grease 0.2grease 0.35grease 0.6grease 1.1oil 0.65 – 1.8

Values apply to uniform load (SF = 1) and an ambient temperature of 20 °C. Rating tables for every ratio, dimensions with and without motor, mounting options, mounting positions and lubrication are in the online catalogue. Not sure? Send us the power and speed – we will choose for you.

FAQ – ZAP

Can I fit my own motor to a ZAP gearbox?

Yes. Type E without motor has an input for an IEC motor in B14 (FT flange) or B5 design (FF flange) – the motor shaft slides into the hollow worm. Connection dimensions for each size are in the catalogue on the page Type E – motor connection. We can also supply the motor – 4-, 6- or 8-pole, with a brake on request.

In which position can a ZAP work?

Sizes 32 to 80 have a lifetime grease filling and work in any position. ZAP 100 has an oil filling – the mounting position determines where the filling, level and drain plugs go, so always state it in your order. Positions and shaft arrangements are in the catalogue on the page Mounting positions.

Is the ZAP gearbox self-locking?

Statically only at higher ratios – the limit is around u = 40, and under vibration and shocks it is not reliable. In operation the gearing is not dynamically self-locking, so wherever a load must be reliably stopped or held, use a brake motor. Details are on the page Efficiency, self-locking, loads.

Can a ZAP replace a TS 031 444 or TSN 030 444 gearbox?

Not one for one. At the same size the output shafts have the same diameter, but the shaft height, mounting holes and flanges differ. If you are replacing a gearbox in an existing machine, stay with the same type – we still make both the TS 031 444 and the TSN 030 444. For a new machine, the ZAP offers six sizes from 32 to 100 mm and ratios up to 100.

Do you supply spare parts for the ZAP?

Yes. As standard we supply the worm and worm wheel, by agreement also bearings and shaft seals – their dimensions for every size are in the catalogue on the page Weights and spare parts. If you are replacing an old ZAP, send us a photo of the nameplate – the code on it is still valid today.

Not sure which size is right?

Send us the power, the required output speed and the mounting – we will choose the right size and ratio for you.