TSN 030 444 worm gearbox
Worm gearboxes

TSN 030 444

TSN 030 444 worm gearboxes have been on the market since 1973 – as geared motors, with gearbox and flange motor in one unit. Many of them still run with a ZŤS Moldava or SJT Moldava nameplate. In 2008 we took over the complete SJT Moldava production programme, so today we manufacture them under their original designation and service them.

50 · 63 · 80 mmcentre distance a
10 – 80gear ratio
up to 1.1 kWmotor power

A rugged classic that refuses to quit

The rugged housing copes well with harsh environments, less careful handling and occasional overloads. With proper maintenance it lasts for decades – and if something does break, repair is quick and affordable thanks to the simple design and available parts.

It fits wherever you need a high ratio in small dimensions, quiet and shock-free running and relatively high power. It works in any position.

A TSN 50 from 1983 in for repair
A TSN 50 from 1983 in for repair – new parts after four decades.
Sizes

Choose the size by torque

Size = centre distance between worm and wheel in millimetres. Each size has its own motor – TSN 50 with 0.25 kW handles up to 21 Nm, TSN 63 with 0.55 kW up to 48 Nm and TSN 80 with 1.1 kW up to 109 Nm.

Outlines are to the same scale, without motor. Speeds and torques for all ratios 10 to 80 are on the catalogue page Ratings and torques.

Technical data

ParameterTSN 50TSN 63TSN 80
Centre distance a [mm]506380
Gear ratios i10 – 8010 – 8010 – 80
Output speed n2 [rpm]19 – 14519 – 14518 – 141
Max. torque Mk2 [Nm]2148109
IEC motor, 4-pole, 50 Hz718090
Motor power [kW]0.250.551.1
Output shaft Ød [mm]22 k628 k635 k6
Permissible load Fr / Fa [N]980 / 5901,180 / 7401,570 / 980
Weight with motor [kg]15.134.041.5

Values apply to a 4-pole motor on 50 Hz mains, Fr / Fa at the middle of the shaft end (not both at once). Speeds and torques for every ratio, dimensions with and without foot, ten shaft end positions, lubrication and the ordering code are in the online catalogue. Not sure? Send us the machine speed and torque – we will choose for you.

TSN in practice

TSN 80×40 made in 1979
TSN 80×40 made in 1979
TSN 030 444 worm gearbox
TSN 030 444 worm gearbox
New bronze worm wheels as spare parts
New bronze worm wheels as spare parts

FAQ – TSN 030 444

What is the difference between the TSN 030 444 and the TS 031 444?

The TSN 030 444 is a geared motor – gearbox and flange motor form one unit, and each size has its own motor (0.25 / 0.55 / 1.1 kW). The TS 031 444 is its upgrade with modular inputs and outputs – with a free input shaft or a flange for an IEC motor, more mounting options and up to 1.5 kW. Both come in sizes a = 50, 63 and 80 mm.

How do I find out which TSN I have?

The designation is on the nameplate, for example TSN 030 444.03 – 63×40 – after the dot comes the shaft end position, then the size and the ratio. The code is explained in the catalogue on the page Ordering code. Or send us a photo of the nameplate and we will work it out for you.

Will the TSN hold a load at standstill on its own?

No. The TSN gearing is not self-locking – for lifting, or with a load that can drive the gearbox backwards, a brake or another holding device is needed. It does, however, work equally well in both directions of rotation.

Got an old TSN with a ZŤS nameplate?

Send us a photo of the nameplate and we will tell you what to do with it. Spoiler – it usually doesn't need throwing away.