On a phone, pinch to zoom or turn the phone sideways.

Series overview

Gearbox and motor in one unit – TSN 030 444 worm geared motors

TSN 030 444 worm geared motors combine a single-stage worm gearbox and a three-phase asynchronous flange motor in one compact drive. They are made for machines and equipment that need low speed and a torque no ordinary motor can deliver.

The series originated in the ZŤS and SJT Moldava nad Bodvou production programme. Since 2008 we have been making it under its original designation and with the original dimensions – a replacement fits exactly where the old unit was.

Inside · TSN 50
Inside the TSN 50 worm geared motor – worm, worm wheel, bearings and output shaft, 3D model
01Compact drive

The motor is flanged directly to the worm – no coupling, no alignment. Each gearbox size has its own motor.

02Ratios 10 to 80

Seven ratios for output speeds from about 18 to 145 rpm with a 4-pole motor.

03Lifetime filling

Filled with Shell Tivela Compound A grease for life – no changing, no topping up. Oil filling is available on request.

04Both directions of rotation

The gearbox runs in both directions. The gearing is not self-locking – it will not hold a load at standstill on its own.

Max. torque Mk2motor power · torque at ratio i = 20
TSN 50 0.25 kW
21 Nm
TSN 63 0.55 kW
48 Nm
TSN 80 1.1 kW
109 Nm

Highest value in the rating table of each size. Torque at all ratios – page 03.

10 – 80ratios i
in 7 steps
18 – 145rpm output
speed n2
109 Nmmax. torque
TSN 80, i = 20
10output shaft
end positions

Send an enquiry for this item

Tell us the size, ratio, shaft end position, mains voltage and quantity – we will prepare a quotation or help you choose.

Send an enquiry