TS 031 444 worm gearbox, size 50, with motor flange and output shaft – 3D model
Worm gearboxes

TS 031 444

The TS 031 444 worm gearbox was developed at ZŤS Moldava as an upgrade of the proven TSN 030 444. Production later passed to SJT Moldava, and since 2008 we have been making it – under its original designation. Units still running reliably around the world show the upgrade was a success.

50 · 63 · 80 mmcentre distance a
10 – 80gear ratio
up to 1.5 kWtransmitted power

Why customers still ask for it

Good design does not age just because it has a few decades behind it. The TS 031 444 fits wherever you need a high ratio, small dimensions and relatively high power.

  • modular inputs and outputs and several mounting options
  • operation in any mounting position
  • quiet, shock-free running and a high ratio in a small housing
  • tolerant of occasional overloads and less careful handling
  • simple, fast and inexpensive repair – all spare parts are available from us
TS 031 444 worm gearbox with ribbed housing
Sizes

Choose the size by torque

Size = centre distance between worm and wheel in millimetres. The deciding factor is the output torque – TS 50 handles up to 51 Nm, TS 63 up to 104 Nm and TS 80 up to 203 Nm (SF = 1).

Outlines are to the same scale. Each size has its own catalogue page with ratings and torques for ratios 10 to 80 and matching IEC motors.

Technical data

ParameterTS 50TS 63TS 80
Centre distance a [mm]506380
Gear ratios u10 – 8010 – 8010 – 80
Output speed n2 at n1 = 1,400 rpm18 – 14418 – 14516 – 141
Max. output torque M2 at n1 = 1,400 / 700 rpm [Nm]43 / 5185 / 100156 / 203
Max. input power P1 at n1 = 1,400 rpm [kW]0.61.071.89
Input shaft d1 – type S [mm]18 js620 js628 js6
Output shaft d2 – versions J, X [mm]22 js628 js635 k6
Hollow shaft d3 – version D [mm]22 H728 H735 H7
IEC motor – type E, B14 flange63 · 71 · 8071 · 80 · 9080 · 90
Weight type S without foot [kg]9.71420.7

Values apply to uniform load (SF = 1) and an ambient temperature of 20 °C. Rating tables for every ratio, dimensions, mounting options, mounting positions and lubrication are in the online catalogue. Not sure? Send us the power and speed – we will choose for you.

FAQ – TS 031 444

What is the difference between the TS 031 444 and the TSN 030 444?

The TS 031 444 is an upgrade of the TSN 030 444 geared motor – with modular inputs and outputs (free input shaft or a flange for an IEC motor), more mounting options, more finely stepped ratios (9 instead of 7) and higher transmitted power (up to 1.5 kW). Both come in the same sizes a = 50, 63 and 80 mm with ratios 10 – 80.

Do you supply spare parts for the TS 031 444?

Yes. We make gear sets, shafts and other parts, supply bearings and seals – and we can repair the gearbox for you, too.

I have an old TS gearbox with a two-digit code. What should I order?

Gearboxes from catalogues published up to 1995 had a version code 01 – 27 (type E) or 31 – 57 (type S). You will find the current designation in the catalogue on the page Old designations – add the size and ratio from the nameplate. Or send us a photo of the nameplate and we will work it out for you.

Can you supply the TS with a motor?

Yes. Type E has a B14 flange for three-phase IEC motors 63 to 90 – we supply the motor for the voltage and frequency you order, with a brake on request, or fit yours. Which motors suit each ratio is shown in the catalogue on the page Type E – motor connection.

Not sure which size is right?

Send us the motor power and the required output speed – we will choose for you.