On a phone, pinch to zoom or turn the phone sideways.
Technical data
Parameters – TS 031 444 worm gearboxes
| TS50 | TS63 | TS80 | ||
|---|---|---|---|---|
| a | Centre distance [mm] | 50 | 63 | 80 |
| u | Gear ratios | 10 – 80 | 10 – 80 | 10 – 80 |
| n1 | Input speed [min⁻¹] | up to 1 400 | up to 1 400 | up to 1 400 |
| n2 | Output speed at n1 = 1 400 | 18.1 – 144.2 | 17.9 – 145.2 | 16.4 – 141 |
| M2 | Max. output torque, n1 = 1 400 [Nm] | 43.2 | 84.6 | 156 |
| M2 | Max. output torque, n1 = 700 [Nm] | 51.3 | 100 | 203.2 |
| P1 | Max. input power, n1 = 1 400 [kW] | 0.6 | 1.07 | 1.89 |
| d1 | Input shaft – type S [mm] | 18 js6 | 20 js6 | 28 js6 |
| IEC | Motor – type E, B14 flange | 63 · 71 · 80 | 71 · 80 · 90 | 80 · 90 |
| d2 | Output shaft J, X [mm] | 22 js6 | 28 js6 | 35 k6 |
| d3 | Hollow shaft D [mm] | 22 H7 | 28 H7 | 35 H7 |
| Fr | Max. radial load, n2 < 10 [N] | 3 000 | 3 900 | 4 100 |
| Fa | Max. axial load, n2 < 10 [N] | 1 800 | 2 200 | 2 400 |
| m | Weight type S without foot [kg] | 9.7 | 14.0 | 20.7 |
| V | Oil, position HN (oil filling) [l] | 0.35 | 0.65 | 1.25 |
Values apply to uniform load (SF = 1) and an ambient temperature of 20 °C. Overhung loads at higher output speeds – page 16. Oil quantity in other positions – page 17.
Gearbox selection in five steps
1Torque2Factors k1 – k43Size and ratio4Shaft loads5Version and position
From the power and speed of the machine determine the torque M = 9550 · P / n, adjust it with the service factors to Mv and choose size and ratio in the rating table so that M2 ≥ Mv. Check the overhung loads on the output shaft and finally choose the version, mounting and mounting position – procedure on page 15.
Send an enquiry for this item
Tell us the size, ratio, type, mounting, mounting position and quantity – we will prepare a quotation or help you choose.