On a phone, pinch to zoom or turn the phone sideways.
Selection
Gearbox selection – TS 031 444 worm gearboxes
The right selection ensures trouble-free operation under the actual working conditions. It starts from the torque needed to drive the machine; the operating conditions are covered by factors k1 to k4.
M = 9550 · P / n1
Mv = M · k1 · k2 · k3 · k42
M2 ≥ Mv3
M – torque of the driven machine [Nm], P – power of the machine [kW], n – machine shaft speed [min⁻¹], Mv – design torque. In the rating table (pages 04 – 06) choose, at n2 ≈ n, the ratio with M2 ≥ Mv. The same applies to the service factor: Sf = P1 / P ≥ k1 · k2 · k3 · k4.
k1 – type of duty
| daily running timeh | Llight | Smedium | Theavy |
|---|---|---|---|
| < 3 | 0.80 | 1.00 | 1.25 |
| 3 – 10 | 1.00 | 1.25 | 1.70 |
| 10 – 24 | 1.25 | 1.70 | 2.00 |
k2 – running time in hours
| % | 100 | 75 | 50 | 25 | 10 |
|---|---|---|---|---|---|
| k | 1 | 0.95 | 0.9 | 0.85 | 0.8 |
k3 – starts per hour
| starts | < 2 | 2 – 10 | > 10 |
|---|---|---|---|
| k | 1 | 1.1 | 1.25 |
k4 – ambient temperature
| °C | < 20 | 30 | 40 | 50 |
|---|---|---|---|---|
| k | 1 | 1.2 | 1.6 | 2 |
Machine classification
L – light, S – medium, T – heavy duty
Lair filters
Scleaners, screw and apron conveyors, filters, desludgers, washing machines, screens, textile machines, fans, thickeners
Tmills, winders, shears, saws, lifts
L, Sgrinders, belt conveyors
L, Tchain conveyors, elevators, mixers
S, Tpumps, woodworking machines, bending machines
S · Lcranes – slewing S, normally loaded travel L
Please consult us in case of
- ambient temperature below −5 °C or above +40 °C
- extremely long or short required service life
- short-time duty
- driving large inertial masses
- reversing operation
Send an enquiry for this item
Tell us the size, ratio, type, mounting, mounting position and quantity – we will prepare a quotation or help you choose.