On a phone, pinch to zoom or turn the phone sideways.
Size ZAP 63
ZAP 63 – ZAP worm gearbox
119 Nmmax. output torque M2 – type S, E (SF = 1)
a = 63 mmcentre distance of the gear set
All sizes to the same scaleoutlines from 3D models · view from the output shaft
Ratio u10 – 100
Max. input power P1 at 1 4001.23 kW
Shafts d1 · d2 · d320 · 28 · 28 mm
IEC motor – type E71 · 80 · 90
Max. Fr / Fa output, n2 < 103 500 / 700 N
Weight ZAP.SJ1 · filling11.71 kg · grease 0.6 kg
Ratings and torques – type S, ESF = 1 · ZAP.S and ZAP.E without motor
| n1 = 1 400 min−1 | n1 = 900 min−1 | n1 = 700 min−1 | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| u | usk | n2rpm | P1kW | M2Nm | η | n2rpm | P1kW | M2Nm | η | n2rpm | P1kW | M2Nm | η | MotorIEC |
| 10 | 9.5 | 147.4 | 1.23 | 68 | 0.85 | 94.7 | 1 | 78 | 0.77 | 73.7 | 0.82 | 87 | 0.81 | 90 |
| 16 | 15.5 | 90.3 | 1 | 83 | 0.78 | 58.1 | 0.82 | 107 | 0.79 | 45.1 | 0.67 | 107 | 0.75 | 90 |
| 20 | 19 | 73.7 | 0.82 | 80 | 0.75 | 47.1 | 0.66 | 100 | 0.74 | 36.8 | 0.55 | 102 | 0.71 | 80 |
| 25 | 23.5 | 59.6 | 0.62 | 73 | 0.73 | 38.3 | 0.5 | 90 | 0.72 | 29.8 | 0.42 | 92 | 0.68 | 80 |
| 31.5 | 31 | 45.2 | 0.67 | 97 | 0.68 | 29 | 0.55 | 119 | 0.65 | 22.6 | 0.44 | 115 | 0.61 | 80 |
| 40 | 38 | 36.8 | 0.54 | 89 | 0.63 | 23.7 | 0.44 | 110 | 0.62 | 18.4 | 0.36 | 112 | 0.59 | 80 |
| 50 | 48 | 29.2 | 0.4 | 77 | 0.58 | 18.7 | 0.32 | 88 | 0.54 | 14.6 | 0.28 | 99 | 0.54 | 71 |
| 63 | 60 | 23.3 | 0.32 | 69 | 0.51 | 15 | 0.26 | 83 | 0.5 | 11.6 | 0.23 | 89 | 0.46 | 71 |
| 80 | 77 | 18.2 | 0.26 | 64 | 0.47 | 11.7 | 0.2 | 74 | 0.45 | 9.1 | 0.18 | 80 | 0.42 | 71 |
| 100 | 100 | 14 | 0.18 | 62 | 0.5 | 9 | 0.14 | 69 | 0.46 | 7 | 0.12 | 73 | 0.44 | 71 |
u – nominal ratio, usk – actual ratio, P1 – max. gearbox input power, M2 – max. output torque in continuous uniform operation, η – efficiency after running-in. Motor – IEC motor frame size for type E (page 10).
Permissible overhung loads on the output shaftFr / Fa [N] · SF = 1
| n2rpm | < 10 | 10 – 25 | 25 – 50 | 50 – 75 | 75 – 100 | 100 – 140 |
|---|---|---|---|---|---|---|
| Fr / Fa | 3 500 / 700 | 3 100 / 620 | 2 600 / 320 | 2 300 / 450 | 2 200 / 440 | 1 900 / 380 |
The radial load Fr acts at the middle of the solid shaft journal. On the input shaft of type S: Fr / Fa = 310 / 60 N.
Send an enquiry for this item
Tell us the size, ratio, type, output, mounting, mounting position, motor and quantity – we will prepare a quotation or help you choose.