On a phone, pinch to zoom or turn the phone sideways.

Operation

Lubrication – ZAP worm gearboxes

We fill the gearboxes with lubricant in production. Sizes 32 to 80 – synthetic grease Shell Tivela Compound A for life. Size 100 – synthetic oil Shell Tivela Oil SD.

At commissioning, fit the supplied breather screw at the highest point according to the mounting position.

Other lubricant – viscosity class
n1rpmVG 
above 1 500220
300 – 1 500460
below 300680

Higher class for higher ambient temperatures, lower for lower ones. Never mix mineral and synthetic lubricants – not all synthetic ones are compatible with each other either.

Approximate filling quantitykg
FillingZAP 32 40 50 63 80 100 
grease, all positions0.110.20.350.61.1–
oil – HN–––––1.8
oil – HP–––––0.65
oil – HH, HD, VH, VD–––––1.2
Plug positions – ZAP 100
breatherlevel and fillingdrain
HN
Worm gearbox ZAP 100 in position HN – plug positions, 3D model
HH
Worm gearbox ZAP 100 in position HH – plug positions, 3D model
VH
Worm gearbox ZAP 100 in position VH – plug positions, 3D model
HP
Worm gearbox ZAP 100 in position HP – plug positions, 3D model
HD
Worm gearbox ZAP 100 in position HD – plug positions, 3D model
VD
Worm gearbox ZAP 100 in position VD – plug positions, 3D model

ZAP 100, type S, arrangement P, from 3D models. Dashed mark – plug on the far side. The highest plug is used for venting, the lowest for draining.

Leak checkafter the first 100 hours, then every 1 000 hours. The grease can only be changed after removing the output cover with a fixture that holds the housing and shaft in position – otherwise the gearing may be damaged. The type of lubricant is stated in the delivery note.

Send an enquiry for this item

Tell us the size, ratio, type, output, mounting, mounting position, motor and quantity – we will prepare a quotation or help you choose.

Send an enquiry