On a phone, pinch to zoom or turn the phone sideways.

Operation

Efficiency, self-locking, loads – ZAP worm gearboxes

Efficiency

The efficiency η = P2 / P1 given in the rating tables applies to a fully run-in gearbox filled with the specified lubricant, loaded with the catalogue torque and warmed up to operating temperature.

A new gearbox does not yet have ideal tooth contact – apply full load only after running-in, during which the load is increased gradually according to the operating instructions.

Self-locking

A gearbox is self-locking when it cannot be driven from the output shaft – this occurs when the gearing efficiency is below 50 %. The limit of static self-locking of the ZAP is at ratio u = 40; under vibration and shocks it is not reliable.

In operation the friction angle of the ZAP is below 2.3° – the gearing is not dynamically self-locking. Where a load must be reliably stopped or held, use a brake motor.

Permissible overhung loads on the output shaftFr / Fa [N] · SF = 1
Frl/2lFaINPUT SHAFT – TYPE SFrl/2lFaOUTPUT SHAFT
n2rpm< 10 10 – 25 25 – 50 50 – 75 75 – 100 100 – 140 
ZAP 32650 / 130650 / 130650 / 130650 / 130600 / 120550 / 110
ZAP 401 400 / 2801 300 / 2601 200 / 2401 000 / 200900 / 180800 / 170
ZAP 502 100 / 4201 700 / 3401 300 / 2601 100 / 220950 / 190950 / 190
ZAP 633 500 / 7003 100 / 6202 600 / 3202 300 / 4502 200 / 4401 900 / 380
ZAP 805 200 / 1 0404 200 / 8503 400 / 6503 000 / 6002 600 / 5202 400 / 480
ZAP 1006 200 / 1 2005 200 / 1 0003 500 / 7003 300 / 6503 000 / 6002 500 / 500
Input shaft of type SFr / Fa [N]
ZAP 32 ZAP 40 ZAP 50 ZAP 63 ZAP 80 ZAP 100 
Fr / Fa140 / 25160 / 30250 / 50310 / 60410 / 80600 / 120

Fr acts at the middle of the solid shaft journal. Take the actual service factor into account as for torque. If the load from a gear, chain or belt drive is too high, increase the wheel diameter or take the load up outside the gearbox. ZAP 63 at 25 – 50 rpm: please check the Fa value with us before designing.

Send an enquiry for this item

Tell us the size, ratio, type, output, mounting, mounting position, motor and quantity – we will prepare a quotation or help you choose.

Send an enquiry