On a phone, pinch to zoom or turn the phone sideways.
Size ZAP 50
ZAP 50 – ZAP worm gearbox
58 Nmmax. output torque M2 – type S, E (SF = 1)
a = 50 mmcentre distance of the gear set
All sizes to the same scaleoutlines from 3D models · view from the output shaft
Ratio u10 – 80
Max. input power P1 at 1 4000.69 kW
Shafts d1 · d2 · d318 · 22 · 22 mm
IEC motor – type E63 · 71 · 80
Max. Fr / Fa output, n2 < 102 100 / 420 N
Weight ZAP.SJ1 · filling6.72 kg · grease 0.35 kg
Ratings and torques – type S, ESF = 1 · ZAP.S and ZAP.E without motor
| n1 = 1 400 min−1 | n1 = 900 min−1 | n1 = 700 min−1 | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| u | usk | n2rpm | P1kW | M2Nm | η | n2rpm | P1kW | M2Nm | η | n2rpm | P1kW | M2Nm | η | MotorIEC |
| 10 | 9.5 | 147.4 | 0.69 | 38.5 | 0.86 | 94.7 | 0.54 | 45 | 0.82 | 73.7 | 0.42 | 44 | 0.8 | 80 |
| 16 | 15.5 | 90.3 | 0.56 | 48.8 | 0.82 | 58.1 | 0.44 | 56 | 0.77 | 45.1 | 0.35 | 56 | 0.75 | 80 |
| 20 | 19 | 73.7 | 0.43 | 45 | 0.8 | 47.4 | 0.35 | 53 | 0.74 | 36.8 | 0.28 | 52 | 0.71 | 71 |
| 25 | 25.5 | 54.9 | 0.33 | 43 | 0.74 | 35.3 | 0.26 | 49 | 0.69 | 27.4 | 0.21 | 51 | 0.69 | 71 |
| 31.5 | 31 | 45.2 | 0.32 | 49 | 0.72 | 29 | 0.27 | 56 | 0.62 | 22.6 | 0.21 | 58 | 0.65 | 71 |
| 40 | 38 | 36.8 | 0.29 | 49 | 0.65 | 23.7 | 0.26 | 57 | 0.54 | 18.4 | 0.2 | 58 | 0.55 | 71 |
| 50 | 51 | 27.4 | 0.21 | 47 | 0.64 | 17.6 | 0.19 | 53 | 0.51 | 13.7 | 0.14 | 52 | 0.53 | 63 |
| 63 | 61 | 22.9 | 0.17 | 40 | 0.56 | 14.7 | 0.14 | 46 | 0.5 | 11.4 | 0.12 | 47 | 0.46 | 63 |
| 80 | 76 | 18.4 | 0.13 | 36 | 0.53 | 11.8 | 0.12 | 42 | 0.43 | 9.2 | 0.1 | 43 | 0.41 | 63 |
u – nominal ratio, usk – actual ratio, P1 – max. gearbox input power, M2 – max. output torque in continuous uniform operation, η – efficiency after running-in. Motor – IEC motor frame size for type E (page 10).
Permissible overhung loads on the output shaftFr / Fa [N] · SF = 1
| n2rpm | < 10 | 10 – 25 | 25 – 50 | 50 – 75 | 75 – 100 | 100 – 140 |
|---|---|---|---|---|---|---|
| Fr / Fa | 2 100 / 420 | 1 700 / 340 | 1 300 / 260 | 1 100 / 220 | 950 / 190 | 950 / 190 |
The radial load Fr acts at the middle of the solid shaft journal. On the input shaft of type S: Fr / Fa = 250 / 50 N.
Send an enquiry for this item
Tell us the size, ratio, type, output, mounting, mounting position, motor and quantity – we will prepare a quotation or help you choose.