On a phone, pinch to zoom or turn the phone sideways.
Size ZAP 80
ZAP 80 – ZAP worm gearbox
233 Nmmax. output torque M2 – type S, E (SF = 1)
a = 80 mmcentre distance of the gear set
All sizes to the same scaleoutlines from 3D models · view from the output shaft
Ratio u10 – 100
Max. input power P1 at 1 4002.17 kW
Shafts d1 · d2 · d328 · 35 · 35 mm
IEC motor – type E80 · 90 · 100
Max. Fr / Fa output, n2 < 105 200 / 1 040 N
Weight ZAP.SJ1 · filling17.89 kg · grease 1.1 kg
Ratings and torques – type S, ESF = 1 · ZAP.S and ZAP.E without motor
| n1 = 1 400 min−1 | n1 = 900 min−1 | n1 = 700 min−1 | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| u | usk | n2rpm | P1kW | M2Nm | η | n2rpm | P1kW | M2Nm | η | n2rpm | P1kW | M2Nm | η | MotorIEC |
| 10 | 10 | 140 | 2.17 | 127 | 0.85 | 90 | 1.7 | 155 | 0.82 | 70 | 1.44 | 169 | 0.85 | 100 |
| 16 | 16 | 87.5 | 1.8 | 165 | 0.84 | 56.2 | 1.5 | 197 | 0.77 | 43.7 | 1.23 | 215 | 0.8 | 100 |
| 20 | 20 | 70 | 1.44 | 159 | 0.8 | 45 | 1.18 | 188 | 0.75 | 35 | 0.95 | 201 | 0.77 | 90 |
| 25 | 25.5 | 54.9 | 1.11 | 149 | 0.77 | 35.3 | 0.9 | 173 | 0.71 | 27.4 | 0.78 | 193 | 0.7 | 90 |
| 31.5 | 32 | 43.7 | 0.94 | 152 | 0.74 | 28.1 | 0.78 | 175 | 0.66 | 21.8 | 0.8 | 233 | 0.66 | 90 |
| 40 | 40 | 35 | 0.94 | 179 | 0.69 | 22.5 | 0.79 | 211 | 0.62 | 17.5 | 0.63 | 216 | 0.62 | 90 |
| 50 | 51 | 27.4 | 0.73 | 166 | 0.65 | 17.6 | 0.62 | 203 | 0.6 | 13.7 | 0.49 | 198 | 0.58 | 80 |
| 63 | 63 | 22.2 | 0.56 | 144 | 0.59 | 14.3 | 0.48 | 172 | 0.53 | 11.1 | 0.4 | 178 | 0.51 | 80 |
| 80 | 84 | 16.7 | 0.54 | 175 | 0.56 | 10.7 | 0.44 | 201 | 0.51 | 8.3 | 0.36 | 209 | 0.5 | 80 |
| 100 | – | 13.8 | 0.3 | 112 | 0.53 | 8.9 | 0.24 | 130 | 0.5 | 6.9 | 0.21 | 139 | 0.47 | 80 |
u – nominal ratio, usk – actual ratio, P1 – max. gearbox input power, M2 – max. output torque in continuous uniform operation, η – efficiency after running-in. Motor – IEC motor frame size for type E (page 10).
Permissible overhung loads on the output shaftFr / Fa [N] · SF = 1
| n2rpm | < 10 | 10 – 25 | 25 – 50 | 50 – 75 | 75 – 100 | 100 – 140 |
|---|---|---|---|---|---|---|
| Fr / Fa | 5 200 / 1 040 | 4 200 / 850 | 3 400 / 650 | 3 000 / 600 | 2 600 / 520 | 2 400 / 480 |
The radial load Fr acts at the middle of the solid shaft journal. On the input shaft of type S: Fr / Fa = 410 / 80 N.
Send an enquiry for this item
Tell us the size, ratio, type, output, mounting, mounting position, motor and quantity – we will prepare a quotation or help you choose.