On a phone, pinch to zoom or turn the phone sideways.
Size ZAP 40
ZAP 40 – ZAP worm gearbox
41.5 Nmmax. output torque M2 – type S, E (SF = 1)
a = 40 mmcentre distance of the gear set
All sizes to the same scaleoutlines from 3D models · view from the output shaft
Ratio u10 – 63
Max. input power P1 at 1 4000.46 kW
Shafts d1 · d2 · d314 · 19 · 19 mm
IEC motor – type E63 · 71
Max. Fr / Fa output, n2 < 101 400 / 280 N
Weight ZAP.SJ1 · filling4.83 kg · grease 0.2 kg
Ratings and torques – type S, ESF = 1 · ZAP.S and ZAP.E without motor
| n1 = 1 400 min−1 | n1 = 900 min−1 | n1 = 700 min−1 | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| u | usk | n2rpm | P1kW | M2Nm | η | n2rpm | P1kW | M2Nm | η | n2rpm | P1kW | M2Nm | η | MotorIEC |
| 10 | 10.33 | 135.5 | 0.46 | 27 | 0.83 | 87.1 | 0.39 | 34.5 | 0.8 | 67.7 | 0.295 | 34 | 0.8 | 71 |
| 16 | 15.5 | 90.3 | 0.355 | 30 | 0.79 | 58.1 | 0.28 | 34 | 0.73 | 45.1 | 0.21 | 33 | 0.76 | 71 |
| 20 | 19.5 | 71.8 | 0.33 | 33 | 0.77 | 46.1 | 0.245 | 37.5 | 0.74 | 35.9 | 0.185 | 36 | 0.77 | 71 |
| 25 | 25.5 | 54.9 | 0.235 | 29.5 | 0.72 | 35.3 | 0.175 | 33 | 0.69 | 27.4 | 0.13 | 32 | 0.69 | 71 |
| 31.5 | 31 | 45.2 | 0.235 | 32.5 | 0.65 | 29 | 0.185 | 37 | 0.6 | 22.6 | 0.14 | 36 | 0.62 | 71 |
| 40 | 39 | 35.9 | 0.21 | 36.5 | 0.65 | 23.1 | 0.17 | 41.5 | 0.6 | 17.9 | 0.12 | 38.5 | 0.61 | 63 |
| 50 | 51 | 27.4 | 0.16 | 31.5 | 0.57 | 17.6 | 0.12 | 36 | 0.55 | 13.7 | 0.092 | 35 | 0.54 | 63 |
| 63 | 63 | 22.2 | 0.125 | 26 | 0.48 | 14.3 | 0.095 | 31 | 0.48 | 11.1 | 0.072 | 30 | 0.48 | 63 |
u – nominal ratio, usk – actual ratio, P1 – max. gearbox input power, M2 – max. output torque in continuous uniform operation, η – efficiency after running-in. Motor – IEC motor frame size for type E (page 10).
Permissible overhung loads on the output shaftFr / Fa [N] · SF = 1
| n2rpm | < 10 | 10 – 25 | 25 – 50 | 50 – 75 | 75 – 100 | 100 – 140 |
|---|---|---|---|---|---|---|
| Fr / Fa | 1 400 / 280 | 1 300 / 260 | 1 200 / 240 | 1 000 / 200 | 900 / 180 | 800 / 170 |
The radial load Fr acts at the middle of the solid shaft journal. On the input shaft of type S: Fr / Fa = 160 / 30 N.
Send an enquiry for this item
Tell us the size, ratio, type, output, mounting, mounting position, motor and quantity – we will prepare a quotation or help you choose.