On a phone, pinch to zoom or turn the phone sideways.

Version details

Position sensors and options – TMP worm gear screw jacks

IS – inductive position sensorstypes N and VS only · to order

Standard cylindrical inductive sensors with M12×1 or M18×1 thread. The sensors must be flush-mountable; another type can be specified by the customer in the order.

1234ORIENTATIONSENSOR POSITIONAstroke + TBCF2STU
TMPAminBminCF2STM12×1TM18×1
2545456032281020
3245456042371020
4545456050441520
6355507565581520
7160507590821520
806560751201082020

The trigger ring has diameter S and width T; set the sensor spacing to stroke + T. Distance A depends on the KA adapter, BL bars or housing mounting and is adjusted as required. The sensors sit in sliding holders – slots in the cover allow adjustment of about 10 mm in both directions. Set distance U from the ring according to the sensor sensitivity; the sensor face must not protrude into the cover. Standard orientation matches the motor – position 2 or 4.

AS – anti-unscrewing ring
Z + Lring
TMPL
2556
3253
4562
6385
7194
80132

A ring at the end of the screw prevents it from being unscrewed. It must not be used as a fixed stop.

NC – without screw cover

Types N and VS are supplied with a lead screw cover as standard. If no cover is required, state NC in the order. In dusty environments protect the screw with MA bellows (page 26) or clean it more often.

Send an enquiry for this item

Tell us the size, type, stroke and quantity – we will prepare a quotation or help you choose.

Send an enquiry