On a phone, pinch to zoom or turn the phone sideways.
Design
Critical speed and buckling – TMP worm gear screw jacks
Critical speedtype RS only – rotating screw
A slender rotating screw whips at its natural frequency – the critical speed nkr. It may run at no more than 80 % of nkr.
nperm = 0.8 · nkr · fkr
fkr = 0.36 without support bearing · fkr = 1 with GP bearing
Screw speed n2 at motor speed n1:
| n1 rpm | TMP 25 | TMP 32 | TMP 45 | TMP 63 | TMP 71 | TMP 80 |
|---|---|---|---|---|---|---|
| 2 800 · SP | 700 | 700 | 466.7 | 400 | 311 | – |
| 2 800 · L | 175 | 175 | 116.7 | 100 | 78 | – |
| 1 400 · SP | 350 | 350 | 233.3 | 200 | 155.6 | 140 |
| 1 400 · L | 87.5 | 87.5 | 58.3 | 50 | 39 | 35 |
| 900 · SP | 225 | 225 | 150 | 128.6 | 100 | 90 |
| 900 · L | 56.25 | 56.25 | 37.5 | 32 | 25 | 22.5 |
| 700 · SP | 175 | 175 | 116.7 | 100 | 78 | 70 |
| 700 · L | 43.75 | 43.75 | 29.2 | 25 | 19.4 | 17.5 |
Buckling strengthscrews under compression
Fk – compressive force at which the screw buckles. If Fperm is lower than the required force, choose a larger size.
rotating screw (RS): Fperm = Fk · fk · ck
non-rotating screw N: Fperm = 0.8 · Fk · fk
non-rotating screw VS: Fperm = cVS · 0.8 · Fk · fk
non-rotating screw N: Fperm = 0.8 · Fk · fk
non-rotating screw VS: Fperm = cVS · 0.8 · Fk · fk
cVS – keyway weakening: 0.6 for TMP 25 and 32, 0.7 for TMP 45 to 71.
fk = 1pivoting mount with adapter and clevis
fk = 0.25screw is not guided
fk = 2screw is guided
fk = 2rotating screw with guided nut, L for max. nut travel
| ckr | 0.1 | 0.2 | 0.3 | 0.4 | 0.5 | 0.6 | 0.7 | 0.8 |
|---|---|---|---|---|---|---|---|---|
| ck | 0.78 | 0.73 | 0.66 | 0.58 | 0.47 | 0.34 | 0.2 | 0 |
ckr = nnkr · fk
ck accounts for the axial load on the rotating screw, n – actual screw speed. Charts redrawn from manufacturer data.
Send an enquiry for this item
Tell us the size, type, stroke and quantity – we will prepare a quotation or help you choose.