On a phone, pinch to zoom or turn the phone sideways.
Parameters – TMP worm gear screw jacks
| TMP25 | TMP32 | TMP45 | TMP63 | TMP71 | TMP80 | |
|---|---|---|---|---|---|---|
| FMax. lifting force [kN] | 5 | 10 | 25 | 50 | 100 | 210 |
| D2Lead screw (trapezoidal) | Tr 18×4 | Tr 20×4 | Tr 30×6 | Tr 40×7 | Tr 55×9 | Tr 80×10 |
| mat.Housing material | Al | Al | GG20 | GG20 | GG20 | GGG40 |
| i SPGear ratio SP | 4:1 | 4:1 | 6:1 | 7:1 | 9:1 | 10:1 |
| i LGear ratio L | 16:1 | 16:1 | 24:1 | 28:1 | 36:1 | 40:1 |
| η SPEfficiency SP [%] | 32 | 30 | 29 | 27 | 22 | 19 |
| η LEfficiency L [%] | 26 | 24 | 22 | 21 | 17 | 14 |
| Mo SPNo-load torque SP [Nm] | 0.04 | 0.11 | 0.15 | 0.35 | 0.84 | 1.5 |
| Mo LNo-load torque L [Nm] | 0.03 | 0.1 | 0.12 | 0.25 | 0.51 | 0.9 |
| Mk maxMax. input torque [Nm] | 3.3 | 7.1 | 18 | 38 | 93 | 148 |
| FR permRadial force on input [N] | 100 | 200 | 280 | 490 | 750 | 1 200 |
| v maxMax. lifting speed SP [mm/min] | 2 800 | 2 800 | 2 800 | 2 800 | 2 800 | 1 500 |
| ZmaxMax. standard stroke [mm] | 700 | 1 000 | 1 300 | 1 300 | 1 300 | 1 300 |
| GWeight at 0 mm stroke [kg] | 1.2 | 2.1 | 6 | 17 | 32 | 63 |
| G100Weight per 100 mm stroke [kg] | 0.35 | 0.45 | 0.7 | 1.2 | 2 | 3.3 |
Al – aluminium alloy · GG20 – grey cast iron · GGG40 – ductile iron. Max. worm shaft speed is 2 800 min−1; for TMP 80 the max. lifting speed is 1 500 mm/min. Longer strokes on request (screw length up to 6 000 mm). Mk max must be higher than the motor starting torque. FR perm applies to a force at the middle of the input shaft (chain or belt drive).
The size is determined by the highest axial force per unit. Check force and speed against duty cycle and ambient temperature, check screws under compression for buckling, and keep the screw speed of type RS below 80 % of critical. Choose the motor from drive torque and speed – ready combinations are on the size pages 04 – 09.
Send an enquiry for this item
Tell us the size, type, stroke and quantity – we will prepare a quotation or help you choose.